Category Archives: Home Page

Sensors Gallery 2 – Home

USB module USB-200

The USB module connects as a network server a logger sensor or a chain of logger sensors to the computer.

Get started by hooking it up with a USB to Mini USB cable (cable included!) to the computer (PC, Mac or Linux),
Attach the sensor or sensors to it and you’re good to go.

Read More >>

Battery module BAT-202

Power up your independent sensor or set of sensors with this 2300 mAh rechargeable battery module for outdoor experiments.

Recharge it with a common USB cable (included!).

Read More >>

Bluetooth module BLT-202

The 3 in one module,

Connects as a network server a logger sensor or a chain of logger sensors to any computer platform – with USB cable (cable included!) to PC, Mac or Linux) or Bluetooth wirelessly to a tablet or to a smartphone.

It can be used also as 2300 mAh rechargeable battery module for outdoor experiments.

Read More >>

Wi-Fi Communication module WIFI-202

The WiFi module allows any NeuLog sensor to connect to computers, tablets and smart phones via wireless communication.

All software comes pre-loaded on the WiFi module and does not require installation. Students simply turn on the WiFi module and it seeks an access point to connect to wireless devices.

No installation required, just plug and play.

The module can be used also as a USB module with USB cable (cable included!).

The module needs to be powered by USB adapter or by battery module.

Read More >>

WiFi-202

Panda Multi-Sensor PANDA-1

The NeuLog Panda multi-sensor can be used for any science experiment which utilizes Room Temperature, Light, Barometric pressure, Altitude, Sound, Relative Humidity, Dew-Point, Magnetic Field and G-Acceleration readings.

Panda is used for environmental data collection and other experiments in Natural Science, Biology, Physics and Chemistry.

It is specially designed for primary school level.

The multi-sensor comes pre-calibrated so you can start experimentation right out of the box.

Read More >>

Panda-main-new1

Graphic Display module VIEW-101

In case you don’t wish to use a PC, you may refer to the VIEW-101 graphic display module.

The module’s touch-screen interface along with intuitive and attractive graphics enables you to set up an experiment in a speedy and simple fashion.

It displays digitally and graphically the gathered data from up to five different sensors at a time.

Read More >>

view101

Digital Display module VIEW-200

What’s an off-line set of logger sensors without the VIEW-200 display module? Simply hook it up to the set and let it do the rest.

All you have to do is scroll through the data screens – one for each logger sensor.

For the off-line set you need a battery module.

Read More >>

view200

RF Communication module RF-201

The RF module is half the duo needed for a wireless connection between your PC or Display module, and a chain of sensors.

Simply attach one unit to the USB module, and another to a set of independent logger sensors (don’t forget a battery module) and that’s it!

Read More >>

rf_module

Voltage logger sensor NUL-201

This sensor can easily and accurately measure voltages across various resistive, capacitive and inductive components.

The sensor can also measure the voltage of voltaic cells, batteries and power supplies.

Voltage can be measured in low or in very high sampling rate (up to 100,000 samples per second).

When used in conjunction with the current sensor, the dependence of the current flowing through the applied voltage can be studied in various electric circuits.

Read More >>

voltage

Current logger sensor NUL-202

Once this module’s 4 mm plugs are connected into an electric circuit, it measures the current through it.

Current can be measured in low or in very high sampling rate (up to 100,000 samples per second).

Read More >>

current

mA Current logger sensor NUL-248

This sensor can be used to measure the current in the mA range.

Once this module’s 4 mm plugs are connected into an electric circuit, it measures the current through it.

Current can be measured in low or in very high sampling rate (up to 100,000 samples per second).

Read More >>

ma-current

Resistance logger sensor NUL-249

The sensor measures the current through the resistance and the voltage on it, its output is a resistance value.

Using ohm’s law (R = V/I) the resistance is calculated from the current and voltage values.

Read More >>

resistance

Charge logger sensor NUL-246

This sensor measures electrostatic charges.

Can be used to explore the nature of static charge, to measure both charge and voltage, to measure charge by induction, quantify the charge on a capacitor or discover the charge distribution on a conducting sphere.

Read More >>

charge

Magnetic Field logger sensor NUL-214

This ultra-sensitive magnetic-field sensor unit is capable of measuring even the lowest levels of magnetic fields, that of planet earth being one of them.

This module measures in milli tesla (mT).

Read More >>

magnetic_field

Temperature Logger Sensor NUL-203

This sensor is used for most disciplines. A biologist could monitor eco-systems, study photosynthesis and enzymes affected by heat or cold, while a chemist could examine exothermic or endothermic reactions. Furthermore, a physicist may use it to examine heat / energy transfer.

The sensor can measure in Celsius or Fahrenheit degrees.

The probe can be put (not the module) in boiling water or in the freezer.

Read More >>

temperature

Surface Temperature logger sensor NUL-233

This sensor measures surface temperature.

This module has the capability of measuring the temperature (in either Celsius or Fahrenheit) of any surface.

Read More >>

surface_temperature

Wide Range Temperature logger sensor NUL-234

This hardcore sensor is capable of measuring temperature in extreme heat conditions.

From extremely low temperature to as high as that of a flame, the module’s thermocouple sensor measures them all, and displays the results in both Celsius and Fahrenheit.

Read More >>

wide-range_temperature

Infrared Thermometer Logger Sensor NUL-235

This logger sensor measures temperature remotely using an infra-red high accurate sensor.</p?

It is very useful when access to the sample is either difficult or dangerous.

Read More >>

infrared_thermometer

Light logger sensor NUL-204

This logger sensor packs an assortment of uses to meet a variety of necessities; from photosynthesis to light emitting chemicals, from light bulbs properties to photovoltaic cells.

Whether in the brilliance of the sunny outdoors or a poorly lit classroom, it measures it all!

The sensor’s sophisticated sampling rate modes allows for measuring fast light changes such as AC supply connected light bulbs, as well as the steady emission of sunlight.

Read More >>

light

UVA logger sensor NUL-232

Photoaging and photochemical smog, are just some of the things affected by UVA radiation.

The UVA logger sensor accurately measures the wave length of UVA, which is 320-370 nm (98% of the total UV radiation).

The light intensity rates are displayed in mW/m2 (milliwatt per square meter).

Read More >>

uva

UVB logger sensor NUL-230

Skin cancer, cataract, immune suppression and vitamin generation in the human body, are just some of the things affected by UVB radiation.

The UVB logger sensor accurately measures the wave length of UV light, which is 280-320 nm (2% of the total UV radiation).

The light intensity rates are displayed in mW/m2 (milliwatt per square meter).

Read More >>

uvb

Oxygen logger sensor NUL-205

Whether in the air or dissolved in water, this module can easily and conveniently measure oxygen levels.

Useful for measuring oxygen during combustion or oxygen emitting processes such as hydrogen peroxide decomposition.

In addition to its free oxygen mode, the logger sensor can also provide data in dissolved-oxygen mode, for instances such as measuring photosynthesis of aquatic plants.

The logger sensor is highly efficient both outdoors and inside a classroom lab.

Its polarographic (Clark) technology, replaceable membranes, and Delrin® electrodes ensure an intuitive interface combined with easy-maintenance and durability.

Sensor zero-offsetting is done by a simple 3 sec. press on the sensor push button.

Read More >>

oxygen

CO2 logger sensor NUL-260

This sensor measures voltage created by a self-generated electromechanical reaction between the sensor and carbon dioxide (CO2) gas in the very air around it.

The results are displayed in ppm (parts of CO2 per million of air).

Read More >>

carbon_dioxide

pH logger sensor NUL-206

Either in the field or in the classroom, this dependable module provides accurate means of measuring common liquids (such as water, milk, soft drinks, vinegar etc.) for their pH levels, as easily as it measures changing values in titrations or experiments involving antacids.

Sensor zero-offsetting is done by inserting it into a pH=7 buffer (or distilled water) and a simple 3 sec. press on the sensor push button.

Read More >>

ph

Conductivity logger sensor NUL-215

This sensor accurately measures solution electrical conductivity on a tri-range level: micro-siemens per centimeter (µS/cm), milligram per liter (mg/L), and parts per million (ppm).

It does so with a state-of-the-art probe with two flat electrodes on a pre-determined surface, allowing the analysis of the signal behavior.

The probe includes temperature transducer for temperature compensation.

Read More >>

conductivity

Colorimeter logger sensor NUL-219

This module determines the red, orange, green, and blue color components of any given solution by measuring color frequency.

Simply turn it on and it will send four colored lights through it.

The amount of each beam that passes is recorded and processed.

This sensor offers a twofold color analysis and value display: absorption and transparency.

Read More >>

colorimeter

Turbidity logger sensor NUL-231

This sensitive sensor projects and measures light that runs through its solution containing tube.

As the solution’s turbidity level is higher, so are the amount/intensiveness light levels.

The turbidity measurement units are Nephelometric Turbidity Unit (NTU).

Read More >>

turbidity

Salinity logger sensor NUL-228

This sensor detects and measures salt content in a solution in three different ranges: %, ppm, mg/L.

Read More >>

salinity

Drop Counter logger sensor NUL-223

This module automatically and accurately does the simple, yet tedious function of counting drops and bubbles.

Perfect for titrations combined with the pH logger sensor.

Read More >>

drop_counter

Sound logger sensor NUL-212

This logger sensor has the impressive ability to measure the very sounds that are all around us in either fast (microphone) or slow (level) modes.

The fast mode (up to 100,000 samples per second) displays graphically the sound wave form.

You can spectrum analyze the signal with Neulog function.

The slow, and more thorough mode, is able to measure the actual sound pressure level, and display the results in decibels.

Add another unit, and you may now determine the velocity of sound propagation in air by timing a pulse travelling between them.

Read More >>

sound

Motion logger sensor NUL-213

Utilizing a trimodal operation system, this motion logger sensor calculates distance, velocity and acceleration.

It effectively operates by transmitting a powerful ultrasonic wave and measuring the time of the echo return.

The sensor has 10 meter range and 2 meter range (for having higher sampling rate).

Read More >>

motion

Rotary Motion logger sensor NUL-226

This sensor’s smooth running pulley measures angles, rotations, rotation velocity and acceleration: rev/s, rad/s2, rad/s.

Read More >>

rotary_motion

Flow logger sensor NUL-224

This sensor allows for a stream of water to flow through its inlet and outlet pipes, thus revolving a rotation wheel within it.

The wheel is not connected mechanically to anything else, but rather floats on a bearing for minimum friction and the enhancement of its minute accuracy.

The measuring is done by monitoring changes in the sensor’s surrounding magnetic field.

Read More >>

flow

Acceleration logger sensor NUL-227

This sophisticated unit measures acceleration on a three-dimensional level. And although each is displayed separately, it supplies a full overview of the desired values.

The logger sensor measures all the three accelerations at the same time and stores it. We can run an experiment on-line, upload one dimension acceleration, freeze it and upload another, using the off-line method.

Read More >>

acceleration

Photo Gate logger sensor NUL-209

This sensor efficiently measures time, velocity or acceleration with one or two photo gates and matching timing cards passing through them.The sensor has six modes of operation:

  1. Velocity with a single gate
  2. Acceleration with a single gate
  3. Acceleration with two gates
  4. Velocity and Momentum with two gates
  5. Delta between two gates
  6. Velocities with a timing card

. Read More >>

photo_gate

Pressure logger sensor NUL-210

This sensor measures gas pressure can be used to investigate both Boyle’s Law and the Gay-Lussac’s Law for ideal gases and others.

Read More >>

pressure

Force logger sensor NUL-211

This logger sensor measures push/pull forces and impacts as well as mass to weight relationships.

The sensor itself is safely contained with a specially designed hook at the bottom that can be connected to various pulling loads.

The sensor’s probe can be hung from a universal laboratory stand.

Sensor zeroing is done by a simple 3 sec. press on the sensor push button.

Read More >>

force

Force Plate logger sensor NUL-225

This module is in fact a weight scale designed for a multi range of purposes.

Simply lay a heavy weight on its surface, or activate a forceful pressure against it, and the logger sensor will measure it.

Read More >>

force_plate

Hand Dynamometer Logger Sensor NUL-237

This sensor comes with a hand-held unit with a built-in strain gauge.

It measures the pressing force on the hand-held unit.

Read More >>

hand_dynamometer

Relative Humidity logger sensor NUL-207

Seemingly a simple box with a hole punctured in it, this sensor offers precise recordings of minute humidity variations.

Log relative humidity fluctuations of different weather conditions, and study its effect on tiny organisms such as seedlings or insects.

Read More >>

humidity

Dew Point logger sensor NUL-245

This sensor measures temperature and humidity and gives the temperature below which the water vapor in that volume of air (at a constant barometric pressure) condenses into liquid water (the dew point).

Read More >>

dewpoint

Soil Moisture logger sensor NUL-229

This clever and innovative module measures soil moisture by inserting a ceramic tipped, water filled tensiometer into the soil and measuring the resulting partial vacuum pressure.

If the soil is dry, water will be pulled out in through the ceramic holes, thus increasing the vacuum.

The vacuum level is rated and logged, reflecting directly on the soil’s moisture levels.

Read More >>

soil_moisture

Barometer logger sensor NUL-221

This sensor was carefully designed to measure barometric pressure, from sea level to mountain top.

The displayed results are the full scope of commonly used units. Namely: kPa (kilopascal), atm (atmospheres), in Hg (inches of mercury), mm Hg (millimeters of mercury)

The sensor has also the range of meters (for altitude) by converting the barometric pressure to altitude.

Read More >>

barometer

Anemometer logger sensor NUL-242

The NeuLog anemometer sensor enables measurements of wind velocity.

Combined with temperature, relative humidity, dew point and barometric pressure sensors, it can be used to make very interesting weather measurements.

Read More >>

anemometer

GPS position logger sensor NUL-243

The NeuLog GPS position logger sensor determines its latitude, longitude, altitude and horizontal velocity anywhere on earth through signals received from the Global Positioning System.

It can be used by itself or together with other NeuLog sensors to perform outdoor experiments in environmental science, physics and more.

A special function creates data for Google map describing the sensors’ values in trail locations.

Read More >>

gps

Heart Rate & Pulse logger sensor NUL-208

Resembling a medical pulse meter, this logger sensor accurately records and measures heart rates using an infrared LED transmitter/phototransistor receiver.

The module’s plethysmograph-based electrodes ensure a dependable reading by attaching them to either finger or ear lobe, and feed accurate values on a bimodal level: either a BPM (beats per minute) or an analog arbitrary value of the measured signal mode.

Read More >>

pulse

Spirometer logger sensor NUL-216

This smart sensor is a user-friendly meter that can calculate the volume of the test subject’s lung by measuring the air flow that passes through its double-ported tube-shaped sensor.

The calculation is done on a sophisticated software level and the results are displayed in liters.

Note: Disposable laminated papers are included with the sensor. A paper must be rolled and put in the tube before using it and exhaling through it.

Read More >>

spirometer

GSR logger sensor NUL-217

The tiniest emotional ripples we unconsciously experience affect our skin’s conductivity.

It is exactly these changes that the Galvanic Skin Response (GSR) sensor measures.

A sudden noise, curious smell, touch, pain or sounds are just some of the things that trigger those conductivity changing emotions.

The module is used successfully as a biofeedback system.

Unlike most biofeedback devices, this unit operates with non-disposable electrodes.

Read More >>

gsr

Electrocardiogram logger sensor NUL-218

Similar in its use to a regular medical ECG (electrocardiogram), this is a rather simple three lead-based logger sensor.

It presents a heartbeat graph that allows a thorough examination of the heart’s electrical activity from three different angles.

Unlike most ECG devices, this unit operates with non-disposable electrodes.

Read More >>

ecg

Blood Pressure logger sensor NUL-222

This sensor is very similar to any advanced digital blood pressure meter found in the modern medical arena. Simply slip the cuff onto your test subject’s arm.

The testing procedure shows what are the measured signals and how blood pressure data is extracted: systolic blood pressure, diastolic blood pressure, mean arterial pressure and heart rate.

Read More >>

blood_pressure

Respiration Monitor Belt Logger Sensor NUL-236

This sensor comes with a belt and measures the air pressure in it.

The pressure changes according to the breathing of the subject. From the measured values, the respiration rate can be calculated.

Read More >>

respiration

Welcome1 – Home

NeuLog Logger Sensors

Flexible. Simple. Fast. Forward Thinking.

    Welcome to the unique world of logger sensors, plug-and-play concept that allows for an easy, precise, friendly and fun way of conducting classroom and field experiments.
    Engage your students with hands-on experiments and bring science to life
    Empower your students with the ability to observe, analyze, and understand data as it happens, solidifying complex concepts through practical application.
    From physics to biology and chemistry, our sensors cover a wide range of scientific disciplines, encouraging interdisciplinary learning and exploration.
    All the logger sensors are pre-set factory calibrated and immediately ready to use.

Bluetooth USB Module with Motion sensor

Bluetooth front – Home

Plug and Play – Just Science

Select any set of sensors for your experiment and connect it to any computer platform via single interface.

  • No calibration
  • No set up time
  • Single Bluetooth/USB module
  • Single wireless communication channel
  • Single 2300mAh rechargeable battery
  • A single intuitive free software for all computer platforms
  • Each sensor saves experiments data in its flash memory
  • Firmware is upgradable

NeuLogR Neuron Logger Sensor is a device that consists of a single probe, a powerful 32-bit controller, a flash memory and a communication interface that allows connection in a chain to other logger-sensors and modules.

Sampling rate and sampled data are not affected by the number of the experiment sensors and wireless interferences.

What is NeuLog?

NeuLog Offers solutions for every age group -home

NeuLog Offers solutions for every age group

Elementary school

Create fascinating school demonstrations and experiments that captivate the imagination of young minds. Present natural phenomena in an appealing way, as easily as connecting building blocks.

Junior high school

Plant the seeds of the scientific thinking in the rich soil that is a young mind. Encourage experimentation in a fun easy way and lay the foundation stone of a future scientist.

High school

Guide high school students through the fascinating worlds of Physics, Chemistry, Biology and Environmental science. Conduct experiments to captivate a youthful mind simply and in diversified ways.

College

Supply the truth seekers of tomorrow with the most ingenious, state of the art tools of the trade. Conduct in depth researches, measurements and analysis of scientific processes and phenomena.

NeuLog Logger Sensors, Kits and Contents for Study and Experiments in: – home

NeuLog Logger Sensors, Kits and Contents for Study and Experiments in:

physics_small

Physics

Mechanics, Sound, Light, Heat, Electricity, Magnetism.
Read more>>
physics_small

Chemistry

Electrochemistry, Solar Energy, Organic chemistry, Physical chemistry, Acids and bases, Chemical solutions.
Read more>>
physics_small

Biology

Biochemistry, Human physiology, Plant physiology, Ecology.
Read more>>
physics_small

Environmental Science

Solar radiation, Atmospheric pressure, Properties of water, Wind velocity, Relative humidity.
Read more>>

NeuLog Accessories – home

NeuLog Accessories

USB, Battery & RF modules

  • USB module (USB-200) provides both power from the PC to the sensors and the communication between them.

WiFi-201

  • The WiFi communication module (WiFi-201)connects wirelessly a NeuLog sensor or chain of sensors to any Wi-Fi system such as iPADs, Android tablets, smart phones, Windows, MAC or Linux PC’s.
  • Any popular browser program can be used. Just plug and surf. No software installation is required.
  • The teacher can view the student’s experiment in remote. Students can view the teacher’s experiment on their tablets.

Graphic display module VIEW-101

  • A simple and intuitive operation: experiment setup can be programmed by using the module’s touch screen.
  • Displays experiments with up to five logger sensors in a chain.

Digital display module VIEW-200

 

  • The VIEW-200 automatically searches for the connected sensors and displays one of them digitally. Scrolling for displaying the reading of another sensor is done by pressing the pushbutton switch on the display module.

NeuLog – Easy to configure to your needs – home

NeuLog – Easy to configure to your needs

Choose what type of data you are going to collect with more than
40 logger sensors.
Choose the hardware you want to work with, and how do you want to view your data.

         PC

 
Accessories needed
direct connection
module_usb
 Wi-Fi
module_wifimodule_battery
 RF
module_rfmodule_battery

Tablet or Smartphone

 module_iphon
Accessories needed
 Wi-Fi
module_wifimodule_battery

    NeuLog Viewers

 module_viewer
Accessories needed
 Direct connection
module_view101module_battery
 Direct connection
module_view200module_battery

NeuLog’s Features – home

NeuLog’s Features

  • Converts the measured parameters into processed value.
  • Each logger sensor stores up to 5 experiments in flash memory.
  • Sends the data in digital form to a viewer unit, a PC or a tablet.
  • Easily calibrated by one push of a button.
  • Uses software to change ranges and gains.
  • Saved experiments can be uploaded to a PC at any time.
  • The most intuitive, rich and friendly NeuLog software, and application for browsers including: On-Line mode, Off-Line mode, tables, graphs, data analysis, double axis set up, statistic operations, mathematical operations.

 

What is NeuLog?

tablet_modulepc_moduleviewer_module

 

Our Highlights – home

Our Highlights

Plug and Play

  • No calibration
  • Readings as soon as connected
  • No set up time

 

Flexible – Probes work with:

  • PC
  • Mac
  • Tablet
  • Smart Phones

 

Multiple Connection Options

Adaptable and Most cost effective solution

  • Use 1 to 10 sensors per experiment
  • No need for expensive hubs to connect
  • Software prepared for the future so you don’t have to spend more

 

Works with future technologies

  • Software is browser based, it will work on any hardware and software of the future with no need for upgrades
  • Firmware is upgradable 

 

Watch our videos!

NeuLog Logger Sensors – Gallery – home

USB module USB-200

The USB module connects as a network server a logger sensor or a chain of logger sensors to the computer. Get started by hooking it up with a USB to Mini USB cable (cable included!) to the computer (PC, Mac or Linux), attach the sensor or sensors to it and you’re good to go.Read More >>

Battery module Bat-202

Power up your independent sensor or set of sensors with this 2300 mAh rechargeable battery module for outdoor experiments. Recharge it with a common USB cable (included!).Read More >>

Bluetooth module BLT-202

The 3 in one module,connects as a network server a logger sensor or a chain of logger sensors to any computer platform – with USB cable (cable included!) to PC, Mac or Linux) or Bluetooth wirelessly to a tablet or to a smartphone. It can be used also as 2300 mAh rechargeable battery module for outdoor experiments. temperature

RF Communication module RF-200

The RF module is half the duo needed for a wireless connection between your PC or Display module, and a chain of sensors. Simply attach one unit to the USB module, and another to a set of independent logger sensors (don’t forget a battery module) and that’s it!Read More >> rf_module

Wi-Fi Communication module WIFI-201 and WIFI-202

The WiFi module allows any NeuLog sensor to connect to computers, tablets and smart phones via wireless communication. All software comes pre-loaded on the WiFi module and does not require installation. Students simply turn on the WiFi module and it seeks an access point to connect to wireless devices.No installation required, just plug and play The module can be used also as a USB module with USB cable (cable included!). The module needs to be powered by USB adapter or by battery module. Read More >> WiFi-202

Panda Multi-Sensor PANDA-1

The NeuLog Panda multi-sensor can be used for any science experiment which utilizes Room Temperature, Light, Barometric pressure, Altitude, Sound, Relative Humidity, Dew-Point, Magnetic Field and G-Acceleration readings.Panda is used for environmental data collection and other experiments in Natural Science, Biology, Physics and Chemistry.It is specially designed for primary school level. The multi-sensor comes pre-calibrated so you can start experimentation right out of the box.Read More >> Panda-main-new1

Digital Display module VIEW-200

What’s an off-line set of logger sensors without the VIEW-200 display module? Simply hook it up to the set and let it do the rest. All you have to do is scroll through the data screens – one for each logger sensor.For the off-line set you need a battery module. Read More >> view200

Graphic Display module VIEW-101

In case you don’t wish to use a PC, you may refer to the VIEW-101 graphic display module. The module’s touch-screen interface along with intuitive and attractive graphics enables you to set up an experiment in a speedy and simple fashion. It displays digitally and graphically the gathered data from up to five different sensors at a time.  Read More >> view101

Voltage logger sensor NUL-201

This sensor can easily and accurately measure voltages across various resistive, capacitive and inductive components.The sensor can also measure the voltage of voltaic cells, batteries and power supplies. Voltage can be measured in low or in very high sampling rate (up to 100,000 samples per second). When used in conjunction with the current sensor, the dependence of the current flowing through the applied voltage can be studied in various electric circuits. Read More >> voltage

Current logger sensor NUL-202

Once this module’s 4 mm plugs are connected into an electric circuit, it measures the current through it.Current can be measured in low or in very high sampling rate (up to 100,000 samples per second). Read More >> current

Temperature Logger Sensor NUL-203

This sensor is used for most disciplines. A biologist could monitor eco-systems, study photosynthesis and enzymes affected by heat or cold, while a chemist could examine exothermic or endothermic reactions. Furthermore, a physicist may use it to examine heat / energy transfer.The sensor can measure in Celsius or Fahrenheit degrees. The probe can be put (not the module) in boiling water or in the freezer. Read More >> temperature

Light logger sensor NUL-204

This logger sensor packs an assortment of uses to meet a variety of necessities; from photosynthesis to light emitting chemicals, from light bulbs properties to photovoltaic cells.Whether in the brilliance of the sunny outdoors or a poorly lit classroom, it measures it all! The sensor’s sophisticated sampling rate modes allows for measuring fast light changes such as AC supply connected light bulbs, as well as the steady emission of sunlight. Read More >> light

Oxygen logger sensor NUL-205

Whether in the air or dissolved in water, this module can easily and conveniently measure oxygen levels. Useful for measuring oxygen during combustion or oxygen emitting processes such as hydrogen peroxide decomposition.In addition to its free oxygen mode, the logger sensor can also provide data in dissolved-oxygen mode, for instances such as measuring photosynthesis of aquatic plants. The logger sensor is highly efficient both outdoors and inside a classroom lab. Its polarographic (Clark) technology, replaceable membranes, and Delrin® electrodes ensure an intuitive interface combined with easy-maintenance and durability. Sensor zero-offsetting is done by a simple 3 sec. press on the sensor push button. Read More >> oxygen

pH logger sensor NUL-206

Either in the field or in the classroom, this dependable module provides accurate means of measuring common liquids (such as water, milk, soft drinks, vinegar etc.) for their pH levels, as easily as it measures changing values in titrations or experiments involving antacids.Sensor zero-offsetting is done by inserting it into a pH=7 buffer (or distilled water) and a simple 3 sec. press on the sensor push button. Read More >> ph

Relative Humidity logger sensor NUL-207

Seemingly a simple box with a hole punctured in it, this sensor offers precise recordings of minute humidity variations.Log relative humidity fluctuations of different weather conditions, and study its effect on tiny organisms such as seedlings or insects. Read More >> humidity

Heart Rate & Pulse logger sensor NUL-208

Resembling a medical pulse meter, this logger sensor accurately records and measures heart rates using an infrared LED transmitter/phototransistor receiver.The module’s plethysmograph-based electrodes ensure a dependable reading by attaching them to either finger or ear lobe, and feed accurate values on a bimodal level: either a BPM (beats per minute) or an analog arbitrary value of the measured signal mode.  Read More >> pulse

Photo Gate logger sensor NUL-209

This sensor efficiently measures time, velocity or acceleration with one or two photo gates and matching timing cards passing through them.The sensor has six modes of operation:
  1. Velocity with a single gate
  2. Acceleration with a single gate
  3. Acceleration with two gates
  4. Velocity and Momentum with two gates
  5. Delta between two gates
  6. Velocities with a timing card
. Read More >>
photo_gate

Pressure logger sensor NUL-210

This sensor measures gas pressure can be used to investigate both Boyle’s Law and the Gay-Lussac’s Law for ideal gases and others.Read More >> pressure

Force logger sensor NUL-211

This logger sensor measures push/pull forces and impacts as well as mass to weight relationships.The sensor itself is safely contained with a specially designed hook at the bottom that can be connected to various pulling loads. The sensor’s probe can be hung from a universal laboratory stand. Sensor zeroing is done by a simple 3 sec. press on the sensor push button. Read More >> force

Sound logger sensor NUL-212

This logger sensor has the impressive ability to measure the very sounds that are all around us in either fast (microphone) or slow (level) modes.The fast mode (up to 100,000 samples per second) displays graphically the sound wave form. You can spectrum analyze the signal with this Neulog function. The slow, and more thorough mode, is able to measure the actual sound pressure level, and display the results in decibels. Add another unit, and you may now determine the velocity of sound propagation in air by timing a pulse travelling between them. Read More >> sound

Motion logger sensor NUL-213

Utilizing a trimodal operation system, this motion logger sensor calculates distance, velocity and acceleration.It effectively operates by transmitting a powerful ultrasonic wave and measuring the time of the echo return. The sensor has 10 meter range and 2 meter range (for having higher sampling rate). Read More >> motion

Magnetic Field logger sensor NUL-214

This ultra-sensitive magnetic-field sensor unit is capable of measuring even the lowest levels of magnetic fields, that of planet earth being one of them.This module measures in milli tesla (mT). Read More >> magnetic_field

Conductivity logger sensor NUL-215

This sensor accurately measures solution electrical conductivity on a tri-range level: micro-siemens per centimeter (µS/cm), milligram per liter (mg/L), and parts per million (ppm).It does so with a state-of-the-art probe with two flat electrodes on a pre-determined surface, allowing the analysis of the signal behavior. The probe includes temperature transducer for temperature compensation. Read More >> conductivity

Spirometer logger sensor NUL-216

This smart sensor is a user-friendly meter that can calculate the volume of the test subject’s lung by measuring the air flow that passes through its double-ported tube-shaped sensor.The calculation is done on a sophisticated software level and the results are displayed in liters. Note: Disposable laminated papers are included with the sensor. A paper must be rolled and put in the tube before using it and exhaling through it. Read More >> spirometer

GSR logger sensor NUL-217

The tiniest emotional ripples we unconsciously experience affect our skin’s conductivity. It is exactly these changes that the Galvanic Skin Response (GSR) sensor measures.A sudden noise, curious smell, touch, pain or sounds are just some of the things that trigger those conductivity changing emotions. The module is used successfully as a biofeedback system. Unlike most biofeedback devices, this unit operates with non-disposable electrodes. Read More >> gsr

Electrocardiogram logger sensor NUL-218

Similar in its use to a regular medical ECG (electrocardiogram), this is a rather simple three lead-based logger sensor.It presents a heartbeat graph that allows a thorough examination of the heart’s electrical activity from three different angles. Unlike most ECG devices, this unit operates with non-disposable electrodes. Read More >> ecg

Colorimeter logger sensor NUL-219

This module determines the red, orange, green, and blue color components of any given solution by measuring color frequency.Simply turn it on and it will send four colored lights through it. The amount of each beam that passes is recorded and processed. This sensor offers a twofold color analysis and value display: absorption and transparency. Read More >> colorimeter

CO2 logger sensor NUL-220

This sensor measures voltage created by a self-generated electromechanical reaction between the sensor and carbon dioxide (CO2) gas in the very air around it.The results are displayed in ppm (parts of CO2 per million of air). Read More >> carbon_dioxide

Barometer logger sensor NUL-221

This sensor was carefully designed to measure barometric pressure, from sea level to mountain top. The displayed results are the full scope of commonly used units. Namely: kPa (kilopascal), atm (atmospheres), in Hg (inches of mercury), mm Hg (millimeters of mercury)The sensor has also the range of meters (for altitude) by converting the barometric pressure to altitude. Read More >> barometer

Blood Pressure logger sensor NUL-222

This sensor is very similar to any advanced digital blood pressure meter found in the modern medical arena.Simply slip the cuff onto your test subject’s arm. The testing procedure shows what are the measured signals and how blood pressure data is extracted: systolic blood pressure, diastolic blood pressure, mean arterial pressure and heart rate. Read More >> blood_pressure

Drop Counter logger sensor NUL-223

This module automatically and accurately does the simple, yet tedious function of counting drops and bubbles.Perfect for titrations combined with the pH logger sensor. Read More >> drop_counter

Flow logger sensor NUL-224

This sensor allows for a stream of water to flow through its inlet and outlet pipes, thus revolving a rotation wheel within it.The wheel is not connected mechanically to anything else, but rather floats on a bearing for minimum friction and the enhancement of its minute accuracy. The measuring is done by monitoring changes in the sensor’s surrounding magnetic field. Read More >> flow

Force Plate logger sensor NUL-225

This module is in fact a weight scale designed for a multi range of purposes. Simply lay a heavy weight on its surface, or activate a forceful pressure against it, and the logger sensor will measure it.Read More >> force_plate

Rotary Motion logger sensor NUL-226

This sensor’s smooth running pulley measures angles, rotations, rotation velocity and acceleration: rev/s, rad/s2, rad/s.Read More >> rotary_motion

Acceleration logger sensor NUL-227

This sophisticated unit measures acceleration on a three-dimensional level. And although each is displayed separately, it supplies a full overview of the desired values.The logger sensor measures all the three accelerations at the same time and stores it. We can run an experiment on-line, upload one dimension acceleration, freeze it and upload another, using the off-line method. Read More >> acceleration

Salinity logger sensor NUL-228

This sensor detects and measures salt content in a solution in three different ranges: %, ppm, mg/L.Read More >> salinity

Soil Moisture logger sensor NUL-229

This clever and innovative module measures soil moisture by inserting a ceramic tipped, water filled tensiometer into the soil and measuring the resulting partial vacuum pressure.If the soil is dry, water will be pulled out in through the ceramic holes, thus increasing the vacuum. The vacuum level is rated and logged, reflecting directly on the soil’s moisture levels. Read More >> soil_moisture

UVB logger sensor NUL-230

Skin cancer, cataract, immune suppression and vitamin generation in the human body, are just some of the things affected by UVB radiation.The UVB logger sensor accurately measures the wave length of UV light, which is 280-320 nm (2% of the total UV radiation). The light intensity rates are displayed in mW/m2 (milliwatt per square meter). Read More >> uvb

Turbidity logger sensor NUL-231

This sensitive sensor projects and measures light that runs through its solution containing tube.As the solution’s turbidity level is higher, so are the amount/intensiveness light levels. The turbidity measurement units are Nephelometric Turbidity Unit (NTU). Read More >> turbidity

UVA logger sensor NUL-232

Photoaging and photochemical smog, are just some of the things affected by UVA radiation.The UVA logger sensor accurately measures the wave length of UVA, which is 320-370 nm (98% of the total UV radiation). The light intensity rates are displayed in mW/m2 (milliwatt per square meter). Read More >> uva

Surface Temperature logger sensor NUL-233

This sensor measures surface temperature.This module has the capability of measuring the temperature (in either Celsius or Fahrenheit) of any surface. Read More >> surface_temperature

Wide Range Temperature logger sensor NUL-234

This hardcore sensor is capable of measuring temperature in extreme heat conditions.From extremely low temperature to as high as that of a flame, the module’s thermocouple sensor measures them all, and displays the results in both Celsius and Fahrenheit. Read More >> wide-range_temperature

Infrared Thermometer Logger Sensor NUL-235

This logger sensor measures temperature remotely using an infra-red high accurate sensor.It is very useful when access to the sample is either difficult or dangerous. Read More >> infrared_thermometer

Respiration Monitor Belt Logger Sensor NUL-236

This sensor comes with a belt and measures the air pressure in it. The pressure changes according to the breathing of the subject.From the measured values, the respiration rate can be calculated. Read More >> respiration

Hand Dynamometer Logger Sensor NUL-237

This sensor comes with a hand-held unit with a built-in strain gauge.It measures the pressing force on the hand-held unit. Read More >> hand_dynamometer

NUL-239 Chloride logger sensor

The NeuLog GPS position logger sensor determines its latitude, longitude, altitude and horizontal velocity anywhere on earth through signals received from the Global Positioning System.It can be used by itself or together with other NeuLog sensors to perform outdoor experiments in environmental science, physics and more. A special function creates data for Google map describing the sensors’ values in trail locations. Read More >> chloride

NUL-240 Ammonium logger sensor

The NeuLog ammonium sensor can be used to measure the concentration of ammonium ions (NH4+) in aqueous samples.It can be used to evaluate the degree of contamination of water due to the use of fertilizers. Ammonium measurements can also be very relevant to study the nitrogen cycle in general and to relate this cycle to plants and algae. This sensor must be used together with NUL-206 pH logger sensor. Read More >> ammonium

NUL-241 Nitrate logger sensor

The NeuLog nitrate sensor can be used to measure the concentration of nitrate ions (NO3) in aqueous samples.Nitrates are used in fertilizers and can contaminate water. Also, untreated human sewage can be a source of nitrate contamination. Nitrate measurements can also be very relevant to study the nitrogen cycle in general and to relate this cycle to plants and algae. This sensor must be used together with NUL-206 pH logger sensor. Read More >> nitrate

NUL-242 Anemometer logger sensor

The NeuLog anemometer sensor enables measurements of wind velocity.Combined with temperature, relative humidity, dew point and barometric pressure sensors, it can be used to make very interesting weather measurements. Read More >> anemometer

NUL-243 GPS position logger sensor

The NeuLog GPS position logger sensor determines its latitude, longitude, altitude and horizontal velocity anywhere on earth through signals received from the Global Positioning System.It can be used by itself or together with other NeuLog sensors to perform outdoor experiments in environmental science, physics and more. A special function creates data for Google map describing the sensors’ values in trail locations. Read More >> gps

NUL-245 Dew Point logger sensor

This sensor measures temperature and humidity and gives the temperature below which the water vapor in that volume of air (at a constant barometric pressure) condenses into liquid water (the dew point).Read More >> dewpoint

NUL-246 Charge logger sensor

This sensor measures electrostatic charges. Can be used to explore the nature of static charge, to measure both charge and voltage, to measure charge by induction, quantify the charge on a capacitor or discover the charge distribution on a conducting sphere.Read More >> charge

Geiger counter logger sensor NUL-247

The most common types of radiation are alpha, beta and gamma.The NeuLog Geiger sensor measures all three types of radiation. The radioactivity of a sample can be measured by counting how many ionizing events occurred in a period of time or as rate (counts per second, for example). Possible experiments that can be performed are: Radioactivity and distance, Lifetime measurements, Biological radioactive markers, measuring half-lives, Radiation shielding, etc. Read More >> Geiger

mA Current logger sensor NUL-248

This sensor can be used to measure the current in the mA range.Once this module’s 4 mm plugs are connected into an electric circuit, it measures the current through it. Current can be measured in low or in very high sampling rate (up to 100,000 samples per second). Read More >> ma-current

Resistance logger sensor NUL-249

The sensor measures the current through the resistance and the voltage on it, its output is a resistance value.Using ohm’s law (R = V/I) the resistance is calculated from the current and voltage values. Read More >> resistance